VIRATA ADSL Ethernet Router Series Manuel d'utilisateur Page 29

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 84
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 28
3 — Configuring Your Router
3-13
3.4 Setting Up NAT Inbound Port Forwarding
(Port Address Translation)
When you have enabled NAT on the WAN interface, in order for people to reach your
HTTP (Web) Server, FTP Server and so on at your LAN, you need to activate the NAT
Inbound Port forwarding.
The following gives an illustration of a Web Server (IP=192.168.1.100) and FTP
Server (IP=192.168.1.101) connected to your router.
For PC A:
IP = 192.168.1.2
Subnet mask = 255.255.255.0
Gateway = 192.168.1.1
For PC B:
IP = 192.168.1.3
Subnet mask = 255.255.255.0
Gateway = 192.168.1.1
NAT Inbound Port Forwarding is not applicable for Transparent
Bridge configuration.
For Web Server:
IP = 192.168.1.100
Subnet mask = 255.255.255.0
Gateway = 192.168.1.1
For FTP Server:
IP = 192.168.1.101
Subnet mask = 255.255.255.0
Gateway = 192.168.1.1
PVC=0/35
PC A
PC B
PCs with
Ethernet
cards
Your Router
LAN IP
192.168.1.1
ADSL
Web Server
FTP Server
WAN
LAN
WAN Gateway = 202.166.29.2
WAN IP
202.166.29.154
Hub/Switch
(The Hub / Switch is optional if your router
has more than 1 Ethernet Ports)
Vue de la page 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 83 84

Commentaires sur ces manuels

Pas de commentaire