VIRATA ADSL Ethernet Router Series Manuel d'utilisateur télécharger pdf (Page 39)

4 — Configuring Your Transparent Bridge

4-3

4.2.2 Step 2: Configuring the LAN

i) To add Ethernet device to the bridge:

bridge device add edd

ii) To add a bridge device, assuming the PVC given by your ADSL Service Provider

is 0/35:

For LLC-SNAP encapsulation:

bridge device add //bun/port=atm/rfc1483=true/mode=llcbridged/txvpi=

0

/

txvci=

35

/rxvpi=

0

/rxvci=

35

(all in one line)

For VCMUX encapsulation:

bridge device add //bun/port=atm/rfc1483=true/mode=vcmuxbridged/txvpi=

0

/

txvci=

35

/rxvpi=

0

/rxvci=

35

(all in one line)

For multiple PVCs, repeat the above commands with the different VPI and

VCI values.

iii) Set the IP address of your router ether port with the address given by your

System Administrator. (This is required in order to run the DSL Router

Commander.):

ip device add bridge ether //bridge

192.168.1.1

ip subnet add bridge.home .

192.168.1.1

ff:ff:ff:0

4.2.3 Step 3: Saving the Configurations

config save

<wan_interface>

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 83 84

Commentaires sur ces manuels

Pas de commentaire